Programmable Electric Bike Controller 800W - CAL-583

1.Intergrating controller and LCD displayer,, 2.Programmable intelligently,, 3.Easy to connect,, 4.Widely used in e-bike kit. - details see: https://www.vehicleto.com/programmable-electric-bike-controller-800w-10027289

Part: Programmable Electric Bike Controller	Place of Origin: Jiangsu China (Mainland)	Brand Name: TROTTER	Model Number: CAL-583
Voltage: 24V/36V/48V	Power: 250W, 350W, 500W, 800W	Max. Current: 18A

contact supplier for Programmable Electric Bike Controller 800W

Programmable Electric Bike Controller 800WCAL-583

Changzhou Trotter Electricity Machinery Co.,Ltd

ISO9001:2008

Model:CAL-583

Certification : CE(TUV RHEINLAND)

Design

Programmable Electric Bike Controller

Voltage

DC:24V/36V/48V

Commutation angle

60º

Motor phase

3-phase motor

Max Electric Current

18A

Power Rated

250W/350W/500W/800W

Low voltage protection

DC 21V±0.5V/DC 31.5V±0.5V/DC 42V±0.5V

Standby power consumption

<3W

Paking

4 sets/carton, five layers Carton

Paking Gross Weight

23KGS

Capacity

1820pcs/20ft container

3640pcs /40HQ container

* Speed Limit:Highest Speed range 35km/h ~ 45km/h (specified by motor). Speed limit under 20km/h.

* Cruise Mode:Automatic Cruise or ters automatic cruise mode which makes e-bikes run at a const speed once releasing control from throttle.

* Indicators:Work with multiple serial or parallel indicators, positive or negative shared indication LEDs( low voltage, current limit or cruise ).

* Speed Indicators:Hall sensor speed indicators, positive or negative phase line speed indicators.

* 1:1 pedal assistance:controller provides power assistance based on pedal feedback(speed) during pedaling. Various central hall sensors are provided like central shaft speed sensors or Torque sensors.

* Braking:work with open circuits low voltage brake, high voltage brake( +5V, +12V…).

* EABS braking:soft EABS braking system without braking noise and damage on motor. It makes motor sharply stop with a soft effect similar to that of EABS on vehicles. This regenerative braking brings energy back to battery from motor motion.

* Running regeneration:after throttle being released, the running motor transfer energy from motion into electrical power being stored into battery. This is power saving but will shorten distance of running. This function is selectable.

* Super low noise:super low noise at motor start and run beyond the performance of traditional brushless controller, making a low vibration and enlarge length of use.

* Low heat generation:use the most advanced complementary PWM technique to lower the system heat generation. It optimizes power usage and extend length of use.

* Multiple current limits:Use average current limit and peak current limit. Peak current limit checks current peak at every PWM cycle and protect MOSFET from resistless peak current and avoid damage. Average current limit makes controller a const current limit performance on all motors at low load, medium load, high load or stall. This simplifies testing process and checking process for e-bike manufacturers.

* Runaway protection:solve the problem of motor runaway from the problem of throttle or circuits and improves reliability.

* Stall protection:controller protects motor stall from stopping motor at 3 seconds in stall.

* Short Circuits protection:controller protected once two or all of three phase lines are connected.

Finished Picture:

More products: Electric Bicycle, Electric Bicycle Motor, Electric bicycle kit, battery charger, throttle, brake lever...

Should you have interest, pls do not hesitate to advise us.

Looking forward to servicing for you.

Packaging Detail:Export Standard Carton

Delivery Detail:5-30 days