Marine Autonomous Autopilot/LCD Display Screen - YFY-FC1013

Marine Autopilot

Description:

(1)This product adoptsprecise military potentiometers as components for transmission and feedback;

(2)The output control is contactless SSR solid-state relay, and use precise integrated circuit control, have the advantage of high control accuracy, low noise, long service life, applicable to all kinds of ships for accurate control of hydraulic steering gear.

1.Power supply:DC24V,

2.Steering rate:2.5deg~5deg/second;

3.Remote Sensitivity:<1.0deg, ,(adjustable)

4.Solenoid valve power: DC24V, 5A;

5.Operating mode:manual,remote,auto,GPS;

1)Manual (Press the button of Left[Red] or Right[Green] on the panel

to operate and to get the wanted rudder Angle value)

2)Remote (Through the manual remote-control unit called "manual follow-up"connected to the host

to operate the ship' rudder at Different positions of the room )

3)Auto (Set the heading orientation of the ship, then automatically operate ship at the setted

orientation;1) when press the button of Left[Red] or Right[Green] on the panel , the mode automatically enter into Manual mode,and it’ll back to Auto mode for a few seconds after loosing the buttons; 2)and when rotating the manul follow-up’s angle is more than 5°, the mode’ll enter into Remote mode, and it’ll back to Auto mode for a few seconds after rotating the follow- up back to the middle position )

4)GPS (under this mode, when the host connected to navigation device, it can fix the deviation

caused by the wave or tide and keep the ship at the right setted destination)

Application: 200 to 100,000 tons ships.

Contact information:

Any items you are interested in,pls contact us as following information:

Tel:+86-591-88020530-813

Fax:+86-591-88020535

M.T:+86-18859135721 or 15080090925

Email:sales002 @yfy-it.com