Marine 4.5M SOLAS Water Rescue Boat

Marine 4.5M SOLAS Water Rescue Boat

Therescue boatsare made of fiberglass reinforced plastics, between its inner hull and outer hull is filled with polyurethane foams to offer sufficient buoyancy. If damages occur to the boat body under water, the buoyant hull can still provide sufficient buoyancy to enable the boat to sail on the safety water surface.

The design of our rescue boat is totally in accordance with the the requiremnt ofSOLAS, IMO, and differentClassification Societies. Therefore,CE, CCS, ABS, BV, DNV, GL, LR, NKK, RINA, etc. are available for our lifeboats.

1. Hull

The open type rescue boat to be constructed with single bottom and square shape of boat stern. The boat hull and inner shell shall be FRP laminate made of fire retardant polyester resin and roving cloth. The boat to be driven by outboard engine, out board engine model: Mercury 30 22.1 Kw power or other.

2. Rescue Boat Type

Inflatable rescue boat, RFP rescue boats , RFP fast rescue boat, RFP encloused rescue boat(partially enclosed and totally enclosed type)

3. Main dimensions

The rescue boat can be classified into 4.3m, 4.5m, 5m, 5.5m, 6.5m and above type rescue boat.

4. Engine and speed

Outboard engine: Mercury, Yamaha, 380J-3, etc.

Speed > 6 Knots

5. Number of persons: based on your boat type(at least 6)

6. Advantages:stability, safety and big capacity.

7.Manufacturing term

Based on the amendments to the international convention for the safety of safety of life at sea,1974;

International life-saving appliance(LSA) code and MSC218,MSC272;MSC.81(70) The resolution for maritime safety committee MSC226,MSC274

Besidesinflatable rescue boat, we can also manufacture theRFP rescue boats, RFPfast rescue boat, RFP encloused rescue boat.