electric bicycle accessory - XW-leds

1, Outside view

2, Lead wire connection

Instrument consists of four core plug-ins and the second core plug pinouts

(1) four core plug-in (SM4Y) connected with the controller, the Red (or yellow) line to supply cathode, the black (or white) line for the power supply cathode, the Green and blue lines for signal lines

(2)the second core plug-in (SM2Y) LED lights (with the same power supply voltage), red line positive electrode for LED lights, black wire electrode for LED lights. (According to customer's needs matching)

3, Function keys

Four button on the instrument, namely switches and switch keys, up key, down key and headlights reduction key. Long press and press each key has different functions and role of combination of two keys have different functions and roles

4, Display content

All the explicit content of the instrument are as follows, feature select different display different content

5, Operation

Battery power, Motor power,speed is based on instantaneous display of electric vehicles running, single, accumulated mileage, according to selected features available mileage.

Short pressing the switching key when there is a VOL, numeric value that is displayed is battery voltage (v).

Short pressing the switching key when there is a DIS, numeric value that is displayed is this bike mileage (KM)

Short press toggle key appears when ODO, ride value that is displayed is cumulative mileage (KM)

Short pressing the switching key when there is a RPM, the values displayed are the motor speed

Short pressing the switching key when there is a TIME, riding for the displayed value is the time duration (h).

Short press 1 plus the 1 key or minus key, modify power stalls

Long press the key to display to enter the cruise, short press the key to display open headlamp

Long press the key to open or close the instrument

6. Parameter settings

Long press and keys together to enter State appears SET to enter the setup parameters, you can make the battery protection, wheel diameter, magnetic signal equivalent of setting

a) When SET and VOL displays at the same time, battery voltage settings, by short pressing the c key to increase voltage value, reduce the voltage by short pressing the d key values

b)Short press the key, SET and display at one time, enter the wheel diameter setting, by short pressing the key to increase wheel diameter value, by short pressing the key to reducing the wheel diameter (inch).

b) Short press the key, SET and at the same time show that entering motor pole replacement ratio. This networked via; when a single magnet motor signals with motor Hall signal is set to 9.

d)\Long pressing the key and key again to exit the set state, while preserving settings parameters

7. Fault display

When the failure of electric bicycles, parts of the instrument will indicate failure, respectively, brake failure, motors, go to failure, controller failure

8, Install

Instrument bracket and screws, and then installed on electric bicycle handle