Dual aviation obstruction light/Twin weatherproof aircraft Light/led obstacle light - LS310C
Type: Lamp | Condition: New | Place of Origin: Shanghai China (Mainland) | Model Number: LS310C |
Brand Name: NANHUA |
LS301C Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light
Main functions and features.
• Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required
• Based on LED technology, low power consumption, and high efficiency.
• Lamp housing –Polycarbonate, with good anti-impact strength, thermal stability, high transmittance.
• Aluminum alloy base with the advantage of light weight and corrosion resistance.
• G3/4”pipe is available, ease of mount.
• with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount.
• Built-in micro monitoring controller unit, when and if the service light fails the controller switch on the standby light automatically.
• Built-in photocell can switch ON/OFF the light at dawn and dusk (optional).
• With outputting alarm signal(optional)
• Extremely Reliable — Major Maintenance Cost Saving
Specification
Standard | Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810 | Vertical degree | ≥10° |
Light source | High quality LED | Horizontal degree | 360° |
LED color | Aviation red(Other color can be customized) | Flashing rate | 30FPM(20-60FPM/ Steady burning ) |
Operating voltage | AC110-240V/ DC48V (Other voltage can be customized) | Flashing duration | 150±20ms |
Power consumption | 6W(Steady burning) /2W(30FPM) | LED life | ≥80,000h |
Intensity | ≥32.5cd | On/off level | 500Lux |
Operating temperature | -40°C ~ +70°C | IP Protection | IP65 |
Relative humidity | 10% ~ 95% (no condensing) | Weight | 4.5kg |
Material | Base:Aluminum alloy, Housing: PC Reflector:ABS,vacuum aluminum film |
Installation and operation
• Check whether the supply voltage does comply with the rated voltage of the lamp.
• Fitting the light on the G3/4” mounting bracket, which should be fixed on a smooth surface with enough mechanical strength. Or you can select our mounting bracket: PJ005, PJ024. (Secure the light reliably against falling in operation.)
• If the light is built in photocell, please do not make photocell facing to light source,also make sure the photocell is not blocked by objects.
• Open the junction box cover, connect power cable and earth wire to corresponding terminals and then remount the cover.
• Switch on the power, and then the light works
Notice
• Temperature rise inside the control box is normal phenomenon
• Please do not open any components inside by yourself
• This product is a sealed structure, do not open, otherwise the company will not warranty
Packaging Detail:packed in carton. |
Delivery Detail:5-15 days |