80CC BICYCLE ENGINE KITS

MANUFACTURER DESCRIPTION:

BRAND NEW 80cc Gas Powered Moped Kit
This kit includes everything you need to convert most any V-frame bike to a gas powered scooter.

Model: F80-80cc
Engine type: Single cylinder, air-cooled,2-stroke
Bore & Stroke:47mm x 40mm = 80cm
Power Rotary Speed Rated Power:
2.5Kw/5000r/min
(3HP/5000r/min)
Max Power:
3.5Kw/6000r/min
(5-6HP/6000r/min)

Ignition Mode: CDI

Fuel type: No.90
Lubrication Oil:10W40/10W30
Mixing Ration for Fuel and Oil:16:1 for new sets (20:1 after running approx 500Km)
Spark Plug: Z4C 14MM
Oil Consumption:2.5L/100Km
Clutch Type: Friction Plate/Dry
Speed Limitation:38-40km/hour

These engines have a top speed of about 35 MPH (pretty fast on a bicycle). Average mileage is 150 MPG!

NO Registration or license needed! (In Some States)(Considered Peddle Assist)

NO Engine Stamp or markings indicating the engine size



This kit comes with every thing that you'll need to convert any regular 26 single speed or multi speed mountain bike into a motorized bike. You'll still be able to pedal the bike and ride like normal or start the engine by releasing the clutch lever. There's no rope pulling needed. You can stop or start the engine as you ride. Twist grip hand throttle controls speeds from 35 to 40/mph depending on the gear ratio. This installation kit comes with a 44 tooth 9 hole chrome racing sprocket with easy to install 9 bolt universal mounting hardware that clamps over the rear wheel hub and spokes. This creates a totally independent drive sprocket and chain that does not interfere with your current drive chain or peddling.



With the built in clutch you maintain full function of the original bike. Pedal, shift, and ride your bike like normal. The engine kit only adds about 19lbs to your bike. When you want to engage the engine simply release the clutch hand lever and the engine springs to life. To power off simply press the included kill switch.



Required:

1. Requires basic mechanics and simple tools

2. It takes about a few hours to install while using easy to follow detailed instructions (included).

The pictures above are pictures of a sample bike that has the motor kit installed. It took approximately 2-3 hours to install and is a great project to work on!



Included:

Teardrop metal gas tank (Black)
44 Tooth chrome sprocket with 9 holes
Magneto with kill switch
Chrome muffler
UPGRADED Clutch Lever and cable
Twist throttle and cable with matching grip for other side
Drive chain idler
Low profile carburetor assembly
High quality Japanese main bearings
CD ignition assembly
Standard bike chain
Chain tensioner guide
Chain guard
Spark plug
All the needed mounting brackets, gaskets, and hardware.
Complete easy to follow installation instructions

Call at: 6044200018 or Tel: 6047811875